3D Scan Forum

Some dental 3D Scan : We can use our DIY 3D Scanners as professional dental scanners too 😎😍. The scan result is extremely detailed and accurate . The scan process is automatic, easy and fast . The software can exports the scan file in different formats, like STL , OBJ and PLY . Scanned using my DIY ...

it depends on your scan purpose. for mechanical and industrial parts, usually accuracy is more important, and for art field , resolution and details on the scan, and also mesh surface quality is more important. a scan can be accurate but low resolution and low detailed (for example you can get perfe...

2.2 meter impeller 3D Scan + Reverse Engineering 😎. There is no limit to the dimensions and size of the object for our DIY Scanners. We scan a wide range of objects with the same setup, from 1 mm to several meters . This impeller is one of the big objects I've scanned. the diameter is 2.2 meter and...

new Macro 3D Scan, Sewing machine needle

just look at the details.
you can clearly read the test on the needle

scanned with 6.3MP Daheng cameras.
HD projector https://t.me/DIY_3D_Scanner

Thanks for the reply, I will look into that. I have a camera I use for inspecting drains its a small camera on the end of a flexible cable with a light. Could something like this be modified to take the correct pictures ? No, it is not as easy as this. maybe you can use photogrammetry, but still it...

You can fill the inside of the shoe with something like clay or resin (silicone and ...), then allow it to dry and then scan the clay. I use this method for scanning industrial parts, the sections which are not accessible, like closed impeller, or multi stage centrifugal pumps. I used this method fo...

Cloning a dead impeller to a new functional one. My new Reverse Engineering case

Scanned with 6.3MP cameras and HD projector, in Modified version of FlexScan3D.
https://t.me/DIY_3D_Scanner

New scan for reverse engineering 😎 it is a small gear for a rare machine. My client asked me to make a clone of it. scanned in modified version of FlexScan3D , using 6.3MP cameras . I scanned it and after reverse engineering I must decide for the manufacturing method. I think it is made by Die-Cast,...

Snip Hi Nasr, I've been well. Just busy with life ATM. I would like to point out to everyone, for full transparency, that the "Modified" Flexscan3D software being SOLD is not endorsed or supported by Polyga. Polyga has no affiliation with greeskynet/Nasr in any way. Thank you for informin...

New scan and Reverse Engineering: Oil cartel 😍😎 This is big 1.3 meter Aluminum item, it was corroded heavily. its surface was so dirty and greasy, and there was no time to clean it. I only applied talcum powder on it (+ small amount of ethanol). but I needed accurate position of the hole on this par...