3D Scan Forum

I think im hitting more issues than i though, my pc can't process the images fast enough unless this is how it suppose to be. If set to 30fps at quality (60 patterns) it should take 2 seconds to complete no? unless it's not a pattern per frame as it's taking 24sec to complete a scan Anyways i tried ...

Not sure about others but i try to scan in the darkest place possible with little ambient light contaminating like a corner of the room and enclose it in blankets. also whats your frame limit set to? Also you'll need to make sure that the camera and mainly the projector doesn't move or your scans wi...

Settings? picture of what your scanning would help too. Im guessing your using 32bit david4 to do this

exposure, calibration scale, ect

I couldn't do it with the mix camera setup as the C-1 usb2 is the bottleneck. once i remove it i'll be limited on the fresh of the projector on my k132 as the usb3.0 allows me to go 60fps (10bit) or 30fps(12bit) in the highest resolution in which i'll start to see banding. I tend to shoot slower to ...

I've been testing out a telescopic camera i've got recently and see how it compares. This is done on a 240mm calibration and so far the gain is somewhat better. The texture grab is also much more accurate on monochrome and the details along the edges are more sharper but it could be much sharper wit...

In my view the projector resolution isn't that important, all it does is displays the patterns. Getting the sharpest projection is more important imo because even if the projector display 720p, the camera only see it as a blot of light, not the pixel on the projector. With my tinkering id say a high...

Hmmm i guess i'll get a monochrome then, the cam is ment for astrology so it's designed for shooting in the dark

I'm shopping again for a high res camera but was given an option to get one in mono. is it really much sharper vs color? It's not 4k but having color would be handy for non scanning as this cam can do 258fps on some lower setting (use it as an action cam)

This is on YUY2 @ 1/8 exposure with the K132 brightness at 57

yes, the usb dongle will still let you use david4