3D Scan Forum

Your images are broken. Too bright and you get noise in the scan. I haven't really seen this as distortion but if you scans are aligning better, That could a problem. Also make sure that all the projector settings for Image are set to zero. Settings like Keystoning, corner compensation, barrel and ...

Thanks Mircr0, I believe my problem was that the projector was too bright and i had to close the lens Aperture too much, i had to set at about 8 to 16, now when i set the aperture to about 4 to 6, i get much better results and scans can be aligned automatically, however there's slight problem with a...

I noticed the picture from the projector looks like this in phone camera image. Is this natural?

My scans don't matchup on large parts. I have a wood carving of a leg of table. The scanner calibrated without a problem and Individal scans look good however they don't match after alignment. For example One side of single shot aligns well but the other side has sth like 1 mm or more gap to the nex...

No one with this issue?

I'm having trouble with USB3 cable, i got a 1.5m and 5m cable. 1.5 meter cable works fine as the camera gets connected at fast speed and full resolution, however its not practical. the laptop should be positioned too close to the scaner. the 5m cable is apparently designed to for camera and has scre...

erapip wrote: ↑10 Mar 2017, 19:57 Yes, same hardware and setup. Flex is 3.1.7 that allow to costumade.

I installed 3.1.0.5, but it only allows uEye and PTgrey.

Im impressed with the speed of their scans. here's one from 2012: https://www.youtube.com/watch?v=Qn5e2Zz2EEM how fast is it possible to go with david and industrial camera? I tried to make david faster by changing maxpatternholdtime from 1000ms to 100ms and it maked the projections fast like the v...

Thanks so much for your help, I'll try it as soon as i get my hands on my new camera.

I got the LG PF1500 recently and I'm seeing low depth of field, which means I'm unable to focus the image to be clear on the entire calibration panel. if i make it focus on the corner, the edges will be completely out of focus. the calibration panel is the printed file that comes with David installa...