3D Scan Forum

Hi man! Nice work.
We are looking forward to see your projector trade secret!

Micr0 wrote: ↑12 Jan 2018, 03:15 FWIW I think the Acer K132 that David uses has a Diamond pixel DLP.

I think so: see picture (the same I posted about the 220mm pattern): please look at it carefully (you probably need to zoom in).

Yes, I did both panels. 110 is simply a photographic paper printed with my canon mx420, then glued with spray contact glue to white melaminic wood particleboard. 220 is printed directly to the wood panels. K132 is unmod: original projector Sorry Bigbomber for the off-topic on panels. And thanks to a...

220 mm panels.
On-the-fly test

(will modify my rig: too low angles, and 12 mm still to tele for unmod Acer K132) some noise around:

Well, I realised I have some room for improvements.. definitely more than expected! :lol: (I'm competing for the most weird results) A fast try (cams with different angles): -wood 110 mm panel with photographic ink-jet printed paper glued with spray contact glue -acer K132 (unmod) -a couple of DMK 2...

Asap I'll post some test. Thanks bigbomber for your help and interest. I noticed a great loss in accuracy when using too small an angle (less than 20°) between projector and a single cam. The same 400mm long object showed 0.5mm and more deviations at its ends when scanned, flipped and scanned again....

Thats's great! Will follow with interest.
I posted K132+ link because in Italy it was not available anymore weeks ago.

Hi, I have an Nvidia quadro k2000, the Nvidia Control Panel does not allow me to fine-tune the refresh rate. I found a nice tool for overriding this limitation: https://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU Now I succeed in fine-tuning my Acer K132 to 60.003 Hz, having my D...

I suggest to take a look to GOM Inspect (free):
http://www.gom-inspect.com/en/overview.php
I found 3D mesh processing very fast and effective (thinning and smoothing). I have no deep experience with hole filling options.