3D Scan Forum

You most declare what software you are going to use for modeling. Most of Engineering CAD softwares don't need high end graphic cards, and specially the CAD softwares from Dassault Systems company work well on integrated GPU of laptops, but if you want to use a Nvidia GPU, you must consider a Quadro...

Hi This is the scan result of a Casio laser projector with HD resolution . The scan result is very good. the surface quality is good and the details I captured are very satisfying. The laser projectors are very similar to LED projectors, but they only change the source of the Blue and green light wi...

Hi everyone Here I post some of my scan and reverse engineering results 😍😎 this is a centrifugal Pump: All parts are scanned, reverse engineered and assembled. Scanner: DIY scanner, HD projector, 6.3MP cameras Scanning software: Modified version of FlexScan3D Reverse Engineering Software: CATIA V5 h...

One of the reasons the LG PF1500 was (is) such a good projector was that aside form a square DLP array, it also had a variable throw that better accommodated our camera lenses than many of the current short throw projector current;y on the market. However I see some of the new 4K projectors, especi...

Hardware Synchronization and Triggering  (HS) 😎 ✅ Increasing scan speed;  You can reach 0.7~1 seconds per scan. ✅ Increasing scan stability;  All scans comes out clean and free of any strips. ✅ Increasing images quality;  Less noise on images and scans. ✅ Reduce load on cameras;  Control the temper...

New enhancements 😍 in last 3 months I've added many new excellent features to modified version of FlexScan3D . Today I want to show you the new version of Challenging Surface Scanning feature 😎 This feature allow you to scan super glossy and dark Items easily without spraying them. With combination...

New enhancements 😍 in last 3 months I've added many new excellent features to modified version of FlexScan3D . Today I want to show you the new version of Challenging Surface Scanning feature 😎 This feature allow you to scan super glossy and dark Items easily without spraying them. With combination ...

Hi friends If you want to do macro scanning , or scan large objects , the turntable you use can be optimized , this video will help you choose the best turntable for your work.😍 Our DIY turntable kit (Arisa) is excellent for macro scanning , and also you can use its Arduino based controller for maki...

I scanned a small 3mm drill bit as an example for macro 3D Scanning. Total scan time, excluding calibration process, was about 4 minutes. The drill bit is extremely shiny and it has sharp edges, so before scanning process, I sprayed it with whitening powder. Scan was done on Arisa 2-axis turntable a...

Revopoint Turntable is supported in modified version of FlexScan3D😍😎 . Revopoint Rotary table is an easy solution for automating calibration and scanning process. it is dual axis and available in the market. it connects to the computer via Bluetooth , and there is no need to install any special dri...