Surface coating for scanning

Write here about construction, ideas, equipment, tips n tricks etc. related to structured light scanning
Post Reply
DenKor
Posts: 15
Joined: 07 Jan 2019, 16:34
Location: Russia

Surface coating for scanning

Post by DenKor »

Hello for everyon!
To scan dark and glare surfaces you have to use a matte spray, but this spay is expensive. One of the cheaper options is to use a solution of isopropanol (or degreaser, which is even cheaper) with talc (50/50). The solution dries quickly and leaves a smooth matte finish.
I did not find pure talcum powder and used the cheapest baby powder.
IMG_20190923_211808_028.jpg
IMG_20190923_213641_819.jpg
The result is very good and verified by several people. Perhaps it is not suitable for a very detailed scan, because the talc granules are large.
IMG_20190923_210350_012.jpg
IMG_20190923_210407_139.jpg
IMG_20190923_210304_727.jpg
the process of applying one of the members of our group in telegram:
https://www.youtube.com/watch?v=L9AkBSmmVVQ
The coating is very easy to remove:
https://www.youtube.com/watch?v=BAA1MCEP-Xo
One of disadvantage of this method is that you need a spray gun or airbrush. Also you need to mix the solution well or filter it so that there are no very large blots:
IMG_20190923_210343_605.jpg
P.S. we have a small group in a telegram where we share experiences and various experiments. Subscribe who are interested in this topic
t.me/Scanner_3D
Post Reply