Commercial Structured light systems

Write here about construction, ideas, equipment, tips n tricks etc. related to structured light scanning
Post Reply
Posts: 144
Joined: 31 Jan 2017, 13:09

Commercial Structured light systems

Post by mading » 12 Oct 2019, 13:42

Hi there.
I'm looking for commercial system with a similar working principle and (at least) similar performance of the commercial HP5 system.

I'm in Italy. Any advice will be appreciated.

Image texture acquisition is not necessary but can be helpful.

Does anybody has any experience with these or similar systems? ... le/cronos/

Many thanks!

HP 3D scan, Acer K132, LG PF50, 2x DMK23UX236, 2xComputar M1214, David Calibration panels, Melamine panels, DIY rotary table

User avatar
Posts: 176
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Commercial Structured light systems

Post by OBNRacerMan » 12 Oct 2019, 19:42

If we take the software of these scanners as a basis, then the HP3Dscan is inferior to any of those listed.
I watched videos on working with programs from Rangevision and Scan-In-A-Box - work with editing holes in scanned models is very well organized there. There is support for sticker markers.
But they all use a flat plate for calibration (not a 90 ° angle). Because of this, calibration takes much longer.
P.S. I don’t know what prices are in Italy, but in Russia the price (when converted to Euro) is 14000-15000 (and the cheapest Rangevision Smart is 4700 Euro)

Post Reply