Page 1 of 1

Commercial Structured light systems

Posted: 12 Oct 2019, 13:42
by mading
Hi there.
I'm looking for commercial system with a similar working principle and (at least) similar performance of the commercial HP5 system.

I'm in Italy. Any advice will be appreciated.

Image texture acquisition is not necessary but can be helpful.

Does anybody has any experience with these or similar systems?

https://rangevision.com/en/products/pro/
https://www.scaninabox.com/
https://www.opentechnologies.it/prodott ... le/cronos/

Many thanks!

m

Re: Commercial Structured light systems

Posted: 12 Oct 2019, 19:42
by OBNRacerMan
If we take the software of these scanners as a basis, then the HP3Dscan is inferior to any of those listed.
I watched videos on working with programs from Rangevision and Scan-In-A-Box - work with editing holes in scanned models is very well organized there. There is support for sticker markers.
But they all use a flat plate for calibration (not a 90 ° angle). Because of this, calibration takes much longer.
P.S. I don’t know what prices are in Italy, but in Russia the price (when converted to Euro) is 14000-15000 (and the cheapest Rangevision Smart is 4700 Euro)