Page 1 of 1

Sense 2 with Kscan3D/FlexScan3D

Posted: 24 Sep 2020, 16:28
by Oesh01
Hey guys!

I am hoping for some guidance with my equipment. I have been using Kscan with a simple Xbox sensor setup... bulky! So recently I purchase a 3D Systems Sense 2 scanner in hopes of updating my setup. I like the form factor of the Sense 2 but don't really care for its software... no control. Is there anyway I can get Kscan to see my Sense 2 scanner?

Help please!

Re: Sense 2 with Kscan3D/FlexScan3D

Posted: 24 Sep 2020, 20:34
by OBNRacerMan
Hey.
If I'm not mistaken, the KScan does not support SR300 sensors (which are used in Sense 2).
The earlier Sense (1) had SR200 (or F200) sensors - so it might still support them (ReconstructMe also supports Sense 1, but not Sense 2).
So if you want some third-party software for working with devices using relatively modern Intel RealSense sensors - SR300/305, D415/435/435i, L505 (lidar) - then use RecFusion - a lot of things are supported there.

P.S. I have a Kinect for xBox 360 (Kinect 1), Intel Realsense SR305 and D415.

Re: Sense 2 with Kscan3D/FlexScan3D

Posted: 24 Sep 2020, 20:47
by Oesh01
I am really hoping that there is a driver that I could install and/or some "tweak" I can do.
I really like the control of the Kscan3D gives.

I have briefly looked into the RecFusion and it looks very similar to what the Sense 2 software offers. More of a scan and go software with very little editing.

Re: Sense 2 with Kscan3D/FlexScan3D

Posted: 24 Sep 2020, 21:05
by OBNRacerMan
Unfortunately, Kscan3D has not been supported for a long time by the developers, because they have completely switched to a different type of scanning in Flexscan 3D. ReconstructMe (and some other programs) are also not updated for a long time.

Re: Sense 2 with Kscan3D/FlexScan3D

Posted: 26 Nov 2020, 23:54
by contactpolyga
Hello,

we're the developers of KScan3D / FlexScan3D.

We are still actively developing FlexScan3d but KSCan3D has long been discontinued. The last publicly available version of KScan3D can be found here if anyone is looking. http://www.polyga.com/download/kscan3d_ ... .2.0.2.exe

We evaluating options around a software package for processing scan data for current generation depth sensors, like the current generation RealSense 4xx sensors etc.. so we should have some announcements sometime mid next year. Sorry that's not very soon for your project. :?

Re: Sense 2 with Kscan3D/FlexScan3D

Posted: 27 Nov 2020, 07:57
by OBNRacerMan
Interesting information. But, as I understand it, if all this is done, it will only be based on the enthusiasm of the developers.