Page 5 of 8
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 23 Oct 2022, 16:54
by greenskynet
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 23 Oct 2022, 20:48
by erol
Very good innovations
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 30 Oct 2022, 21:11
by greenskynet
new update
Now Daheng cameras can be used in my modified version of FlexScan3D via Daheng SDK
Before this Daheng cameras were available via Dshow driver in my modified version of FlexScan, but now I've connected them via their certain SDK and we have access to all of specs of cameras in the software.
I've added Daheng SDK not for a simple scanning task, but for a special purpose which will be a super big surprise in near future! guess what ...
in future I will add more SDKs for other manufacturers and companies to my modified version for time to time
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 01 Nov 2022, 04:19
by kurtzanker
Hi, I have just started using FlexScan 3D and it is totally worth it to only use with expensive products.
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 01 Nov 2022, 07:33
by greenskynet
kurtzanker wrote: ↑01 Nov 2022, 04:19
Hi, I have just started using FlexScan 3D and it is totally worth it to only use with expensive products.
my modified version can support all products. from cheapest to the most expensive ones
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 13 Nov 2022, 08:14
by greenskynet
watch the following video about fast scanning modes in my modified version of FlexScan3D
https://www.youtube.com/watch?v=4Xjp3XpulaI
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 29 Nov 2022, 07:18
by greenskynet
Scan a 1.3 Ton impeller in FlexScan3D modified version
watch the following video:
https://www.youtube.com/watch?v=S1BBUxyiWM4
thanks to
three fast scanning modes and also
Binning option in my modified version of FlexScan3D, scanning of this big impeller took less than 4 hours
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 15 Dec 2022, 18:23
by greenskynet
New minor update
now
VRMagic cameras are supported in my modified version (including
VRMagic VRmC-9+/BW)
in my last update I've added VRmagic cameras to
modified version of FlexScan3D based on a request from one of my clients.
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 09 Jan 2023, 17:04
by greenskynet
Hi to all
I've released new update for my
modified version of FlexScan3D!
The change log:
1-
Shiny_Object_Scanning mode has been added. this is a great feature
2- Fast scanning modes are on the max speed. we can call it
super fast. I expect 1.3 second per scan for Dshow users, or even faster (mostly lest than 1 second per scan).
3- some other minor upgrades
My focus on this update was on "
shiny object scanning mode". This mode helps to
scan shiny surfaces with no need to matte and spray them with whitenning spray. Surfaces like metals, ceramics and shiny plastics. Also it helps on dark surfaces scanning too.
The user can combine it with
HDR function to scan
multi color and
shiny objects very effectively
In the two following photos you can see the scan result of two shiny metal objects without matting them. You can see clearly how well and effective my new update is
(this test was done by one of my professional clients, Mr. Erol)
follow my new updates and results in our Telegram group: https://t.me/DIY_3D_Scanner
--------
in the second photo, the red scan is with disabling "shiny objects scanning mode", and the pink scan is with enabling "shiny objects scanning mode"
Re: FlexScan3D modified Version (perfect support for Directshow and WebCam)
Posted: 14 Jan 2023, 10:11
by greenskynet
Hi everyone
Another new professional update for my modified version of FlexScan3D!!!
Hardware Triggering and synchronization is now available in my
modified version of FlexScan3D!
This feature is an advanced option that is only available on the expensive professional SLS scanners, and no DIY 3D scanner kit has this feature until now.
Hardware triggering is a method to synchronize 'the cameras, the software and the projector' and control them in a
close loop system.
by using hardware triggering we can reach extremely high capturing rate (about 0.2~0.3 seconds per scan).
And due to stable illumination and capturing condition in particular short time intervals, the scans
quality will be so better, the edges will be sharper and cameras will be less sensitive to ambient light and noises.
By hardware triggering you
don't have limitation about any cameras exposure time, you can select any value and it is not important to have any considerations about projector frequency. The synchronization circuit will cover all of these shortcomings.
Also by Hardware triggering, with some few certain considerations it is possible to
use lower resolution projectors and receive the same scan quality of the high resolution projectors. can anyone guess any reason for this? As a guide, I mentioned the reason in above lines of my post
This update is available for all cameras, including Dshow cameras, Basler cameras and FLIR cameras. But your cameras must have I/O connector.
Fortunately most of industrial cameras have I/O port, but if your cameras don't have I/O port, don't worry, I have some other solutions to bypass this problem too!
This update is a part of the goal of my SLS project, a professional DIY hand held scanner