3D Scan Forum

Greetings everyone!

In case you missed this (probably have!)
This amazing software is now free!

https://www.polyga.com/flexscan3d/#download

And yes, this is the full suite of tools that was once only available with the purchase of a 3d scanner from Polyga.

Here are some technical specs with a list of recommended cameras to use.

https://www.polyga.com/technical-specifications/

I strongly recommend using Basler or Point Grey cams as they have optimized drivers included with Flexscan3D and enable HDR scanning.

Cameras using directshow drivers (Imaging Source and other brands) are "ok" but lack HDR scanning support and generally have slower scan capture times.

Enjoy!

Has anyone written and or posted a detailed how to on modifying the PF1500/HF60 projector?

greenskynet wrote: ↑27 May 2024, 05:16 Snip

Hi Nasr,
I've been well. Just busy with life ATM.

I would like to point out to everyone, for full transparency, that the "Modified" Flexscan3D software being SOLD is not endorsed or supported by Polyga.

Polyga has no affiliation with greeskynet/Nasr in any way.

Scanning with gray points works really well. This is my scan test. https://youtu.be/rebcpZ1Nw1A?si=z9Exi7bYauVsqMOB

Fly wrote: ↑14 Jun 2024, 08:49 Scanning with gray points works really well. This is my scan test. https://youtu.be/rebcpZ1Nw1A?si=z9Exi7bYauVsqMOB Image_1718208328801.pngImage_1718208319660.png

Nice scans. Which point gray cameras (Lenses) and which projector?

Is that a boars skull?

used is POINT GREY GS3 U3 91s.The projector is a modified DLP1080p home projector.50mm lens

I revive this topic.
I would like to know if there's anybody using basler cameras out there, with the unmodified flexscan.

I am. What would you like to know?

Hi Alonso,
I was wondering how easy is to setup a couple of Basler ACE/ACE2

What model number are your cameras?
I use acA2040-55um cams and they are a breeze to setup.