A few scans

What have you scanned recently?
erol
Posts: 49
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol »

:)
Attachments
2019-04-21_21-33-36.png
2019-04-21_21-33-13.png
User avatar
Micr0
Posts: 586
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: A few scans

Post by Micr0 »

Those are very sharp scans. Have you looked at the RMS error value on your calibration. Just curious what numbers you get?
µ
erol
Posts: 49
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol »

1. and 2. scan
The RMS error values are 0.16 - 0.18 and I used a 60mm calibration panel.

3.scan(gear)
RMS error values are 0.163 - 0.187 and I used 120mm calibration panel
erapip
Posts: 56
Joined: 16 Dec 2016, 07:16

Re: A few scans

Post by erapip »

Nice scan erol. How do you align the two sides of the gear together. If possible to show some picture of the scan setup
Regards
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: A few scans

Post by martan »

Very nice!

Small "claydots" for alignment?

Martin in Sweden
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
erol
Posts: 49
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol »

Hello.
I did the gear scan 3 months ago, I don't have it right now.
This is the way I'm going to scan gear parts.
1. Scan the top surface
2. Position the piece upright and scan it 360 degrees and align it to the number 1 scan group.
3. Scan the bottom surface and align it to the scan group 2.

I put claydots on the top, bottom and sides of the object. I'll align the scans with claydots :D .
erol
Posts: 49
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol »

a few scans :D

I was absent for a long time due to the intensity of my work.
I bought a new scanner for large objects (thunk3d fisher s handheld scanner).
I'll be adding samples scanned with this scanner soon.
Attachments
2020-05-04_18-45-23.png
2020-05-04_18-44-53.png
2020-05-04_18-36-20.png
2020-05-04_18-35-39.png
2019-11-10_16-30-00.png
2019-11-10_16-27-59.png
2019-08-17_16-06-15.png
2019-08-17_16-05-49.png
erol
Posts: 49
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol »

:D
Attachments
2020-10-29_15-56-09.png
2020-10-29_15-55-34.png
2020-10-29_15-51-07.png
2020-10-29_15-50-57.png
2020-10-29_15-49-53.png
2020-10-29_15-49-10.png
2020-10-29_15-46-32.png
2020-10-29_15-46-16.png
erol
Posts: 49
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol »

:)
Attachments
2020-10-29_15-42-45.png
2020-10-29_15-42-14.png
2020-10-29_15-38-45.png
2020-06-13_20-07-13.png
2020-06-13_20-05-59.png
2020-06-04_01-04-57.png
2020-06-04_01-04-16.png
2020-06-04_01-03-46.png
User avatar
OBNRacerMan
Posts: 372
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: A few scans

Post by OBNRacerMan »

Great scans
Soft: RangeVision DIY, Calibration panel/Rotary tables - RangeVision, Prj: LG PF1500G, Cam: Daheng Mercury MER2-630-60U3M-L (USB3.0, monochrome) x2, Obj: ZLKC FM12036MP5 (F2.8/5Mp/12-36mm) x2. And a handheld scanner Creality Ferret
Post Reply