Page 1 of 3

A few scans

Posted: 03 Feb 2019, 14:04
by erol
120mm panel
0,16-0,17 rms
accuracy: 0,03mm
turn table and david sls3 dual camera
hp 3d scan 5.5.1

Re: A few scans

Posted: 04 Feb 2019, 02:39
by Alonso
Very Nice!! :o

Were those done with the use of the HP turntable?

Re: A few scans

Posted: 04 Feb 2019, 16:17
by Micr0
Excellent!

Can you show us your set up?

Re: A few scans

Posted: 06 Feb 2019, 21:10
by erol
Alonso wrote: 04 Feb 2019, 02:39 Very Nice!! :o

Were those done with the use of the HP turntable?
Yes Alonso I use Hp turn table when scanning small pieces.

Micr0 wrote: 04 Feb 2019, 16:17 Excellent!

Can you show us your set up?
This is my scanner

Re: A few scans

Posted: 06 Feb 2019, 21:26
by erol
Part size 33mm
I used a 60mm calibration panel.
Rms: 0.192 - 0.194
Accuracy: 0.01 mm

And very important, i used play dough to help align. :D

Re: A few scans

Posted: 08 Feb 2019, 02:17
by Micr0
Sweet. Thanks. look forward to seeing more scans. :)

Re: A few scans

Posted: 16 Apr 2019, 21:05
by mr_cg
@erol
Really very nice!
But how do you use the turntable with dual cameras?
Based on my knowledge it's not possible to use turntable with dual cameras.
Would be great if you have solution for his. Thanks

Re: A few scans

Posted: 17 Apr 2019, 12:12
by Micr0
mr_cg wrote: 16 Apr 2019, 21:05 @erol
Really very nice!
But how do you use the turntable with dual cameras?
Based on my knowledge it's not possible to use turntable with dual cameras.
Would be great if you have solution for his. Thanks
Why do you say this? He appears to be using the David turntable which is sold with the 2 camera SLS system.

Re: A few scans

Posted: 17 Apr 2019, 18:41
by mading
Only extended view is disabled when using turntable.

Re: A few scans

Posted: 21 Apr 2019, 18:38
by erol
Hello there.
I'm using david sls3 with two cameras. The software is also HP 5.5.1
The turntable is the david turn table.
The system scans in automatic stereo mode when scanning with dual camera and automatic turntable. If you are going to use a manual turntable or a single scan, you can select an extended mode.
I didn't have any problems with double camera and automatic turn table scans.