Page 1 of 1

Handrest

Posted: 16 May 2019, 19:21
by martan
Handrest for a Swedish fighter jet:

Quite easy job. As usual 2x DMK 23UX236 with Computar 12mm and Optoma 750e.
RMS of 0,11 and 0,08. Calibration panels HP at 120mm. DIY Rotary table.
Mostly stereo mode except for the cavity (extended mode).

Re: Handrest

Posted: 16 May 2019, 23:08
by Micr0
martan wrote: 16 May 2019, 19:21 Handrest for a Swedish fighter jet:

Quite easy job. As usual 2x DMK 23UX236 with Computar 12mm and Optoma 750e.
RMS of 0,11 and 0,08. Calibration panels HP at 120mm. DIY Rotary table.
Mostly stereo mode except for the cavity (extended mode).
Great work.

Thanks for sharing.

Re: Handrest

Posted: 17 May 2019, 06:18
by mading
Wow!
A very nice work Martan!

Still I can't realise why my 120mm panels performs so differently.

Are rms independent from the projector?

Re: Handrest

Posted: 17 May 2019, 06:54
by martan
@mading,

I can check my settings again and send to you.
A faint memory about "panel angle compensation setting" affecting the RMS error quite heavily.

:-)

Re: Handrest

Posted: 17 May 2019, 08:08
by mading
Thanks martan. You are very kind.

I'll take a picture of the panel and share it in another post. I thinks it's poorly printed.

Re: Handrest

Posted: 17 May 2019, 19:54
by martan
v 5.2

Don't think I changed anything else.

Re: Handrest

Posted: 22 May 2019, 11:14
by illbefucd2
Great job.
Thanks for sharing :)

Re: Handrest

Posted: 27 May 2019, 04:51
by martan
The "joystick top" that sits in front of the handrest. Mesh and solid.

Re: Handrest

Posted: 13 Sep 2019, 19:18
by erapip
martan wrote: 16 May 2019, 19:21 Handrest for a Swedish fighter jet:

Quite easy job. As usual 2x DMK 23UX236 with Computar 12mm and Optoma 750e.
RMS of 0,11 and 0,08. Calibration panels HP at 120mm. DIY Rotary table.
Mostly stereo mode except for the cavity (extended mode).
Hello martan,
Very good scan? Have you 3D Print the first Handrest? If you van share the STL i would like to 3D print it and see the top details how it will look.
Nice job!
Regards