Hello! I'm new in 3d scanning and these are some of my scans:
My hardware is: LG PF 1500G, RisingCam E3ISPM03100KPA (chinese camera from AliExpress with sony imx 256 sensor), 12mm ZLKC CCTV lens 2/3" HM1214MP5 (from AliExpress).
P.S. it's 21 scan with 24 pattern and i used fusions settings 1500 : 2
5 minutes in manual scan mode and 1.5 hours of processing. Unfortunately I have a very slow computer with AMD A6-7310 processor
Helmet and shoe
Helmet and shoe
Last edited by DenKor on 29 May 2019, 16:41, edited 3 times in total.
Re: Helmet and shoe
Excellent! thanks for sharing.
Did the shiny surface of the helmet cause problems? did you use spray?
µ
Re: Helmet and shoe
Re: Helmet and shoe
Very interesting... nice job!
Seems that LG it's worth a try
Seems that LG it's worth a try
LG PF50, LG PF1500, RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
Re: Helmet and shoe
Very nice!!!
Is the camera you are using monochrome or color camera?
The results are really excellent.
Is the camera you are using monochrome or color camera?
The results are really excellent.
Re: Helmet and shoe
It is a colour camera with IMX265 1/1.8" SONY Exmor CMOS sensor.
I am making a new mount for camera and projector , so I hope that over time there will be more scans.