Page 1 of 1

Helmet and shoe

Posted: 29 May 2019, 16:31
by DenKor
Hello! I'm new in 3d scanning and these are some of my scans:
My hardware is: LG PF 1500G, RisingCam E3ISPM03100KPA (chinese camera from AliExpress with sony imx 256 sensor), 12mm ZLKC CCTV lens 2/3" HM1214MP5 (from AliExpress).
2019-05-29_08-59-31.png
2019-05-29_08-59-14.png
2019-05-29_09-06-57.png
2019-05-29_09-06-45.png
photo_2019-05-29_09-07-22.jpg
photo_2019-05-29_09-07-13.jpg
P.S. it's 21 scan with 24 pattern and i used fusions settings 1500 : 2
5 minutes in manual scan mode and 1.5 hours of processing. Unfortunately I have a very slow computer with AMD A6-7310 processor :(

Re: Helmet and shoe

Posted: 29 May 2019, 16:34
by DenKor
One more scan:
2019-05-20_19-19-53.png
2019-05-20_19-20-05.png
2019-05-20_19-20-11.png
2019-05-20_19-20-23.png
photo_2019-05-20_19-18-45 (2).jpg
photo_2019-05-20_19-18-45 (3).jpg
photo_2019-05-20_19-18-45.jpg
Снимок6.JPG

Re: Helmet and shoe

Posted: 29 May 2019, 21:13
by Micr0
DenKor wrote: 29 May 2019, 16:34 One more scan:
2019-05-20_19-19-53.png
2019-05-20_19-20-05.png
2019-05-20_19-20-11.png
2019-05-20_19-20-23.png
photo_2019-05-20_19-18-45 (2).jpg
photo_2019-05-20_19-18-45 (3).jpg
photo_2019-05-20_19-18-45.jpg
Снимок6.JPG
Excellent! thanks for sharing.
Did the shiny surface of the helmet cause problems? did you use spray?

Re: Helmet and shoe

Posted: 30 May 2019, 19:10
by DenKor
Micr0 wrote: 29 May 2019, 21:13
DenKor wrote: 29 May 2019, 16:34 One more scan:
2019-05-20_19-19-53.png
2019-05-20_19-20-05.png
2019-05-20_19-20-11.png
2019-05-20_19-20-23.png
photo_2019-05-20_19-18-45 (2).jpg
photo_2019-05-20_19-18-45 (3).jpg
photo_2019-05-20_19-18-45.jpg
Снимок6.JPG
Excellent! thanks for sharing.
Did the shiny surface of the helmet cause problems? did you use spray?
I did not use spray or surface matting. So I had some problem areas when scanning (especially in the corners due to reflection):
2019-05-29_09-09-32.png

Re: Helmet and shoe

Posted: 31 May 2019, 16:12
by mading
Very interesting... nice job!
Seems that LG it's worth a try :-)

Re: Helmet and shoe

Posted: 23 Jun 2019, 19:11
by mr_cg
Very nice!!!

Is the camera you are using monochrome or color camera?
The results are really excellent.

Re: Helmet and shoe

Posted: 24 Jun 2019, 07:02
by DenKor
mr_cg wrote: 23 Jun 2019, 19:11 Very nice!!!

Is the camera you are using monochrome or color camera?
The results are really excellent.
It is a colour camera with IMX265 1/1.8" SONY Exmor CMOS sensor.
I am making a new mount for camera and projector , so I hope that over time there will be more scans.