Comparison of different cameras

What have you scanned recently?
Post Reply
User avatar
OBNRacerMan
Posts: 247
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Comparison of different cameras

Post by OBNRacerMan »

The green object was obtained using a "professional" ToupTek UCMOS03100KPA camera (3.1Mp / sensor 1/2 "/ 8fps) USB 2.0
Blue object with cheap camera YW500U3 (5.1Mp / sensor 1 / 2.5 "/ 25fps) USB 3.0

Model height - 110mm
owl_compare_01.jpg
owl_compare_02.jpg
owl_compare_03.jpg
Soft: RangeVision DIY, Calibration panel/Rotary tables - RangeVision, Prj: Byintek UFO R9, Cam: Daheng Mercury MER-630-60U3M-L (USB3.0, monochrome) x2, Obj: ZLKC HM1628MP10 (F2.8, 10Mp, 16mm) x2 & Azure 3518M3M (F1.8, 3Mp, 35mm).
User avatar
Micr0
Posts: 473
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: Comparison of different cameras

Post by Micr0 »

Thanks for sharing. At a glance, the "cheap" camera seems to have better specs than the ToupTek. Not surprising the scans look more detailed. There does seem to be more noise in those scans however A common problem with higher resolution cameras.
µ
User avatar
OBNRacerMan
Posts: 247
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Comparison of different cameras

Post by OBNRacerMan »

Micr0 wrote: 12 Aug 2019, 15:31 to be more noise in those scans however A common problem with higher resolution cameras.
This is not surprising - there are more pixels and less matrix.
However, it seemed to me that the dynamic range of a cheap camera is higher. If with the first camera a place painted 100% in red gave an artifact, then in the second the same place is often scanned normally.
But these simple Chinese cameras with Aliexpress also have drawbacks - both of my YW500U3 "red" cameras may require turning them on/off several times before a normal image appears (otherwise, either a black screen, or white, or stripes or low contrast). Although the exact same cameras (but with a larger body - black in the photo) from the same manufacturer work without problems.
Two cameras of the same type from the same manufacturer - but they work differently
Two cameras of the same type from the same manufacturer - but they work differently
I liked the ToupTek camera - but scanning was too very very slow ... sold it.
ToupTek 3100KPA
ToupTek 3100KPA
Soft: RangeVision DIY, Calibration panel/Rotary tables - RangeVision, Prj: Byintek UFO R9, Cam: Daheng Mercury MER-630-60U3M-L (USB3.0, monochrome) x2, Obj: ZLKC HM1628MP10 (F2.8, 10Mp, 16mm) x2 & Azure 3518M3M (F1.8, 3Mp, 35mm).
Post Reply