Some of my scans

What have you scanned recently?
martan
Posts: 36
Joined: 23 May 2018, 19:18
Location: Sweden

Re: Some of my scans

Post by martan » 04 Oct 2019, 11:48

You must start the AutoIt-script before HP3Dscan. Tried that?

User avatar
OBNRacerMan
Posts: 46
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Some of my scans

Post by OBNRacerMan » 04 Oct 2019, 13:57

martan wrote:
04 Oct 2019, 11:48
You must start the AutoIt-script before HP3Dscan. Tried that?
I know it. But I was not able to get any “reaction” from Deviare at all. Therefore, I had to rewrite the script (and the motor control firmware) so that it would at least process the pressing of the "S" key.
I am not a programmer, so I can not even imagine the reasons for the inoperability.

User avatar
OBNRacerMan
Posts: 46
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Some of my scans

Post by OBNRacerMan » 14 Oct 2019, 20:22

There was also another attempt to scan shiny metal (without filters yet) and without matting:
20191008181116s.jpg
Appearance of the original three-finger composition - 1 :-)
20191008181140s.jpg
Appearance of the original three-finger composition - 2 :-)
no_money_06.jpg
Combined Parts
no_money_01.jpg
Finish merge - 1
no_money_02.jpg
Finish merge - 2
no_money_03.jpg
Finish merge - 3
P.S. The inscription reads - No money!

martan
Posts: 36
Joined: 23 May 2018, 19:18
Location: Sweden

Re: Some of my scans

Post by martan » 15 Oct 2019, 10:08

Nice!

:)

mading
Posts: 105
Joined: 31 Jan 2017, 13:09

Re: Some of my scans

Post by mading » 16 Oct 2019, 19:57

Well done!

User avatar
Micr0
Posts: 356
Joined: 15 Nov 2016, 15:20

Re: Some of my scans

Post by Micr0 » 17 Oct 2019, 16:23

Excellent. Thanks for sharing.
µ

User avatar
OBNRacerMan
Posts: 46
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Some of my scans

Post by OBNRacerMan » 04 Nov 2019, 20:22

An additional day off (we have a holiday here), did not know what to do, and decided to conduct a check of the repeatability of the "accuracy" of the scan. Namely, how much the scan made “now” coincides with the scan made “once” (of course, during this time the camera positions, calibrations, etc. have changed many times).
I took a scan made in the summer, made a new scan and combined it. When comparing, the accuracy of 0.15 mm was chosen (at 0.5 (by default) it shows almost no difference at all) - it turned out that it fits quite well :)
2019.11.04_chizh_compare.jpg
Here is such a result

Post Reply