Page 1 of 2

Control Stick

Posted: 12 Jul 2018, 17:15
by martan
Control Stick for a fighter aircraft. Which one?

Sprayed with cyclododecane. Surface not perfect but the need for no cleaning of spray after makes it ok anyway.
Number of scans is more than I wished for.

Stereo mode, Manual turntable (I think I like this best. "IKEA Snudda" sprayed with matte black.)
RMS of 0,08 & 0, 07, Original HP-panels 120mm scale. It aligns very well!

Re: Control Stick

Posted: 12 Jul 2018, 19:13
by mading
Awesome! :o

Re: Control Stick

Posted: 16 Jul 2018, 02:29
by nancyluo
Done by Thunk3D colorful Desktop 3D Scanner Cooper C20 with Accuracy about 0.08mm

Re: Control Stick

Posted: 18 Jul 2018, 13:48
by Micr0
martan wrote:
12 Jul 2018, 17:15
Control Stick for a fighter aircraft. Which one?

Sprayed with cyclododecane. Surface not perfect but the need for no cleaning of spray after makes it ok anyway.
Number of scans is more than I wished for.

Stereo mode, Manual turntable (I think I like this best. "IKEA Snudda" sprayed with matte black.)
RMS of 0,08 & 0, 07, Original HP-panels 120mm scale. It aligns very well!
Excellent! Thanks for sharing.

Re: Control Stick

Posted: 07 Aug 2018, 08:01
by martan
More experimenting:

20 scans on automated turntable.
beforealignment.JPG
Before alignment
Mobile-clip of the alignment.
https://www.youtube.com/watch?v=yw-N7-t6srg
(Intel i7 6700k 16GB RAM)

notfused.JPG
Aligned but not fused

Re: Control Stick

Posted: 07 Aug 2018, 21:14
by mading
Great job Martan.
I have the david panels, and I got 0.14 on the 240 mm panel, but higher (0.23-0.40) on the 120.
Sme cameras and lenses.
Different projector (acer k132 non hp)
Do you use inside corner?

Re: Control Stick

Posted: 08 Aug 2018, 11:11
by martan
Mading,

I use 120mm scale "inside corner". I turn the panels until cameras "see the same" - until RMS is equal.
This case 0,07-0,08-ish on both. I tried the setting "Compensate angle between panels" It doesn't seem to affect
RMS much but the scans aligned horribly. :?:

Projector and cameras. Not even the same distance from projection lens.
Sorry about the messy "cave" :-)
cave.JPG
Man Cave
Again 20 scans:
20scans.JPG
20 scans

Re: Control Stick

Posted: 08 Oct 2018, 19:01
by martan
Another control stick for a fighter aircraft. Stick itself scanned in stereo mode and the base is
scanned mostly in extended mode. Optoma ML750e, 2x TIS 23UX236 with 12mm
Computar and original HP Calibration panels 120 mm. Works fine without to much problems.

Greetings from Sweden :)


stick.JPG
Control Stick

Re: Control Stick

Posted: 09 Oct 2018, 12:37
by mading
Always great job Martan!
Nice to see you are active.

Re: Control Stick

Posted: 09 Oct 2018, 15:27
by Micr0
martan wrote:
08 Oct 2018, 19:01
Another control stick for a fighter aircraft. Stick itself scanned in stereo mode and the base is
scanned mostly in extended mode. Optoma ML750e, 2x TIS 23UX236 with 12mm
Computar and original HP Calibration panels 120 mm. Works fine without to much problems.

Greetings from Sweden :)



stick.JPG
Nice work! Thanks for sharing.