Turbo Snail scanned with Flexscan3D

What have you scanned recently?
Post Reply
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Turbo Snail scanned with Flexscan3D

Post by Alonso »

"With great power, comes great responsibility"
*Scans garden ornament* :mrgreen:
Enjoy!
Attachments
FlexScan3D_zlPqe3vpbm.png
FlexScan3D_Z96WY58Gpj.png
FlexScan3D_ROCfsFASxY.png
FlexScan3D_ePoxHxWZVq.png
mading
Posts: 307
Joined: 31 Jan 2017, 13:09

Re: Turbo Snail scanned with Flexscan3D

Post by mading »

That is really a good example for reverse engineering organic surfaces :lol:
Nice scan Alonso.

Which camera are you using? IS or a new one? ;)
LG PF50, LG PF1500, RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Re: Turbo Snail scanned with Flexscan3D

Post by Alonso »

Still on the IS. There has been zero interest in my cameras.
It's ok as there is obviously nothing wrong with them anyway :mrgreen:
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Re: Turbo Snail scanned with Flexscan3D

Post by Alonso »

And then we 3d print the scan, naturally!
The scan had to be modified slightly to address overhangs in a couple areas. Now it's fully printable without the use of any supports.
Attachments
20210313_101717.jpg
20210313_101728.jpg
NARMELLA

Re: Turbo Snail scanned with Flexscan3D

Post by NARMELLA »

Alonso wrote: 13 Mar 2021, 16:49 And then we 3d print the scan, naturally!
The scan had to be modified slightly to address overhangs in a couple areas. Now it's fully printable without the use of any supports.
Hi Alonso.

Was a nice result.

Is it possible to explaine more about your hardware and "flexscan3d" ?

Thanks.
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Re: Turbo Snail scanned with Flexscan3D

Post by Alonso »

Narmella,

FlexScan3D is the software I'm using instead of HP/David-3D.

Hardware wise I'm using IS 3.1mp cameras with global shutter, 12mm lenses, 1080p dlp projector
Post Reply