Page 1 of 1

help hikvision camera no display

Posted: 22 Nov 2020, 13:41
by lvc505
Hikvision MV-CE060-UM and daheng MER-130-30UM, tried many methods no display .

I email hikvision to request support, no response, no way to ask for help,

Image

help

Re: help hikvision camera no display

Posted: 22 Nov 2020, 15:47
by Micr0
lvc505 wrote: 22 Nov 2020, 13:41 Hikvision MV-CE060-UM and daheng MER-130-30UM, tried many methods no display .

I email hikvision to request support, no response, no way to ask for help,

Image

help
Are the cameras showing up on the USB bus in the device manager?
Are you using windows 10?

Re: help hikvision camera no display

Posted: 23 Nov 2020, 03:04
by lvc505
Are the cameras showing up on the USB bus in the device manager?
Are you using windows 10?
[/quote]


hi yes win10 camera showing device manager

I installed hikvision all drivers are useless.
Camera plug-in hikvision software/OBS/sparkocam/usb camera software...other all are useless.

The main reason is the wrong address
Image

hikvision camera iso very poor temperature high
The lens aperture is opened to the maximum

Image

Email to the hikvision official is useless No response

Re: help hikvision camera no display

Posted: 23 Nov 2020, 14:14
by Micr0
It has been a long time since I had to sort USB (IRQ?) conflicts. Unless someone here knows what to do, I would imagine that this is something that you have to sort with the camera manufacturer.

Re: help hikvision camera no display

Posted: 23 Nov 2020, 21:28
by OBNRacerMan
lvc505 wrote: 23 Nov 2020, 03:04 The main reason is the wrong address
Image
This is normal for some types of industrial cameras.
My former Mindvision SUA630M cameras were not in the Cameras section, but in the imaging Devices tab:
Pic.1
Pic.1
cam-usb3.0_02.jpg (18.41 KiB) Viewed 11083 times
The new Daheng MER630 cameras are located in the Machine Vision Digital Cameras tab:
Pic.2
Pic.2
And only one Daheng brand camera can work with HP3Dscan:
Pic.3
Pic.3

Re: help hikvision camera no display

Posted: 24 Nov 2020, 04:08
by lvc505
Micr0 wrote: 23 Nov 2020, 14:14 It has been a long time since I had to sort USB (IRQ?) conflicts. Unless someone here knows what to do, I would imagine that this is something that you have to sort with the camera manufacturer.
Thank you
Email to Hikvision official did not respond
Try many methods 😰 invalid

Re: help hikvision camera no display

Posted: 24 Nov 2020, 04:45
by lvc505
OBNRacerMan wrote: 23 Nov 2020, 21:28
This is normal for some types of industrial cameras.
My former Mindvision SUA630M cameras were not in the Cameras section, but in the imaging Devices tab:
cam-usb3.0_02.jpg

The new Daheng MER630 cameras are located in the Machine Vision Digital Cameras tab:
daheng_properties_04.jpg

And only one Daheng brand camera can work with HP3Dscan:
hp3dscan_15.jpg
thank you
Daheng Camera mer-130-30um
Image

Hikvision camera correction is invalid

Compare
Hikvision mv-ce060-10um
The Imaging Source 42BUC03
Image

Hikvision camera
1. poor after-sales
2. not available
3. very low light
4. high temperature