New DIY turntable

Discuss about cameras, projectors, calibration panels, turntables etc.
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Re: New DIY turntable

Post by Alonso »

Native cad models are preferred but STEP works too
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New DIY turntable

Post by martan »

What is native to you? I used Solid Edge ST7 for this project. I think...
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Re: New DIY turntable

Post by Alonso »

I use Solidworks and Fusion360. STEP should be ok
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New DIY turntable

Post by martan »

Try this!

Quick and dirty as always.
Attachments
RotaryTable.zip
(19.28 MiB) Downloaded 333 times
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
kth307000
Posts: 25
Joined: 17 Jul 2020, 15:35

Re: New DIY turntable

Post by kth307000 »

martan wrote: 03 Jun 2020, 19:22 I made the openscan turntable earlier in this year. Fun to build but not much use for me....

What I have missed for a long time is a slightly larger turntable that can handle a lite more weight.
I looked in the garage what I had and designed with the parts I found. Cost was close to zero.
Some 3D-printed parts and the plate from the "IKEA Snurra" . Arduino Uno with Stepper Shield.


It works fine :-)

with_plate.JPG

without_plate.JPG

turn3.JPG

turn2.JPG

turn1.JPG

Concept:
(https://sites.google.com/site/janbeck/3 ... for-david4)
Will this turntable work automatically in the david program?

If it works, I wonder how it is possible.

I'm always envious of those who are very capable.
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New DIY turntable

Post by martan »

It will work with the "extra layer" of program (made in AutoIt/Deviare) by Jan Beck in the Google-link.

HP3D-scan->AutoIt->Arduino

(Not as smooth as it was when David 4 had the simple COM-port feature)
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
Post Reply