Cleaning metal surfaces with marking laser ...

Discussions about 3D-Printing, CNC-Milling, etc.
User avatar
VDX
Posts: 36
Joined: 05 Feb 2017, 10:43

Re: Cleaning metal surfaces with marking laser ...

Post by VDX »

... here some samples of "micro-machining" - did tests with varying hatch-densities and repeated engraving in brass and a multi-layer ceramic part.

First the tests in brass - with 30microns hatch-spacing and 10x ablating it will "engrave" 0,3mm deep:
Messing 1x 3x 10x.jpg
Messing 1x 3x.jpg

... in ceramic it's a bit more effective - same parameters and 10x engraving will remove 0,6mm:
Blue Keramik - Oben.jpg
Blue Keramik - Unten.jpg
Blue Keramik Vorne - 1x 2x.jpg
Blue Keramik 1x 10x - 50-250µ.jpg
Blue Keramik 1x 10x - 30-150µ.jpg
Viktor
User avatar
VDX
Posts: 36
Joined: 05 Feb 2017, 10:43

Re: Cleaning metal surfaces with marking laser ...

Post by VDX »

... not precise/fine enough to make own coins, but good for some laser-"engraving" and "drilling" ;)
Cent-Fraesen.jpg
Cent-Fraesen-3_detail.jpg
Viktor
Post Reply