New Open Source Turntable

Discuss about cameras, projectors, calibration panels, turntables etc.
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New Open Source Turntable

Post by martan »

It's alive!
Desk still messy
Desk still messy
After massive problems (broken i2c-controller) with I2C to the display it is now up and running. It does what one expects.

Next case is to make it work with HP3Dscan according to my old setup with the DIY turntable (Arduino/AutoIt).
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
mading
Posts: 307
Joined: 31 Jan 2017, 13:09

Re: New Open Source Turntable

Post by mading »

Congratulations! Bravo!!
Are you going to automate both axis?
We want a video!!
LG PF50, LG PF1500, RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New Open Source Turntable

Post by martan »

Yes, automate both axes. My old rotary table makes 20 scans - no more, no less.
I will do the same here so no fancy settings. Mayby 40 scans then; 20 in tilted position 1 and 20 in tilted position 2.
Unless I come up with something more clever.

:-)
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
mading
Posts: 307
Joined: 31 Jan 2017, 13:09

Re: New Open Source Turntable

Post by mading »

How is it going with the rest tourque?
Do you have any vibration or loose step during tilting?

Hungry for videos!
LG PF50, LG PF1500, RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New Open Source Turntable

Post by martan »

yesyes :-)

Haven't really tested it yet. The stepper-circuits seems to stay cool and nice so no problem to keep the current on to the motors.

Yesterday I looked for (and found) the Arduino-code and AutoIT-code so I can get to work.

Slowly forward :-)
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
martan
Posts: 96
Joined: 23 May 2018, 19:18
Location: Sweden

Re: New Open Source Turntable

Post by martan »

At home with man-cold.

I made some Arduino-code för the Openscan Rotary table and adjusted the AutoIt-script to make 40 scans (instead of 20).

Something like this:
1. Tilt table some 40 degrees in one direction
2. Make 20 scans with the rotor
3. Tilt table some 40 degrees the other direction
4. Make 20 scans with the rotor

It works. Not necessary but a bit fun :-)

Before alignment
Before alignment
Aligned
Aligned
Fused
Fused
HP 3D Scan, Optoma ML750, 2x IS DMK 23UX236 with Computar 12mm, HP calibration panel, DIY Rotary tables.
User avatar
Micr0
Posts: 586
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: New Open Source Turntable

Post by Micr0 »

martan wrote: 27 Feb 2020, 14:21 At home with man-cold.

I made some Arduino-code för the Openscan Rotary table and adjusted the AutoIt-script to make 40 scans (instead of 20).

Something like this:
1. Tilt table some 40 degrees in one direction
2. Make 20 scans with the rotor
3. Tilt table some 40 degrees the other direction
4. Make 20 scans with the rotor

It works. Not necessary but a bit fun :-)


OpenScanNotAligned.JPG

OpenScanAligned.JPG

OpenScanFused.JPG
Cool!. Looks like it works better than the Amal concentric you scanned. :)
µ
User avatar
OBNRacerMan
Posts: 372
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: New Open Source Turntable

Post by OBNRacerMan »

Very nice
Soft: RangeVision DIY, Calibration panel/Rotary tables - RangeVision, Prj: LG PF1500G, Cam: Daheng Mercury MER2-630-60U3M-L (USB3.0, monochrome) x2, Obj: ZLKC FM12036MP5 (F2.8/5Mp/12-36mm) x2. And a handheld scanner Creality Ferret
mading
Posts: 307
Joined: 31 Jan 2017, 13:09

Re: New Open Source Turntable

Post by mading »

Annotazione 2020-02-27 174244.png
Annotazione 2020-02-27 174244.png (42.44 KiB) Viewed 9754 times
LG PF50, LG PF1500, RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
mr_cg
Posts: 21
Joined: 10 Jul 2018, 20:17

Re: New Open Source Turntable

Post by mr_cg »

Wow ... that's really cool project. :D
Is there any YouTube video availalbe to show the OpenScan with HP Scan in action?
And could somebody summarize shortly which code is needed on the OpenScan Arduino and which SW mod on the Windows PC with HP 3d Scan v5?
Post Reply