David / IS Cameras + FlexScan3D

Post Reply
contactpolyga
Posts: 73
Joined: 26 Nov 2020, 23:26

David / IS Cameras + FlexScan3D

Post by contactpolyga »

Hi all,

Thanks to the users who sent us their Imaging Source cameras over Christmas, we did a quick scan the David IS cameras via DirectShow drivers, probably will take some time to polish off the drivers and to release a new version at the end of the month for anyone with IS cameras to try.

--
ISCameraTest1.jpg
ISCameraTest3.png
pottersfriend
Posts: 13
Joined: 19 Jan 2017, 17:36

Re: David / IS Cameras + FlexScan3D

Post by pottersfriend »

Very cool.

Thanks for the progress update.
IS DFK-37BUX178 (2x) w/16mm, Dell M110, LG PF1500, HP3DS, & FS3D
Alonso
Posts: 109
Joined: 05 Dec 2016, 05:55
Location: USA

Re: David / IS Cameras + FlexScan3D

Post by Alonso »

Nice! This is great news!
User avatar
Micr0
Posts: 586
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: David / IS Cameras + FlexScan3D

Post by Micr0 »

contactpolyga wrote: 12 Jan 2021, 21:57 Hi all,

Thanks to the users who sent us their Imaging Source cameras over Christmas, we did a quick scan the David IS cameras via DirectShow drivers, probably will take some time to polish off the drivers and to release a new version at the end of the month for anyone with IS cameras to try.

--

ISCameraTest1.jpg

ISCameraTest3.png
Thanks. Looking forward to trying Flex with my full David rig. The point grey camera I have is very old and I haven't been able to get it to work with my scanning computer.
µ
mading
Posts: 307
Joined: 31 Jan 2017, 13:09

Re: David / IS Cameras + FlexScan3D

Post by mading »

Thanks. It's really a good news for us.
It will help the community of DIYrs growing.
LG PF50, LG PF1500, RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
contactpolyga
Posts: 73
Joined: 26 Nov 2020, 23:26

Re: David / IS Cameras + FlexScan3D

Post by contactpolyga »

Hi all,

The beta implementation of the IS driver is done. If you've received a demo of the software, you'll need a new version. Please email our support email to get a beta FS3D build to test it with your Imaging Source / HP system. It's our initial pass so we do expect some rough edges and bugs, but just let us know and we'll try to fix it for you.
User avatar
Micr0
Posts: 586
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: David / IS Cameras + FlexScan3D

Post by Micr0 »

contactpolyga wrote: 19 Jan 2021, 23:15 Hi all,

The beta implementation of the IS driver is done. If you've received a demo of the software, you'll need a new version. Please email our support email to get a beta FS3D build to test it with your Imaging Source / HP system. It's our initial pass so we do expect some rough edges and bugs, but just let us know and we'll try to fix it for you.
Thank you. Emailing now.
µ
User avatar
Micr0
Posts: 586
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: David / IS Cameras + FlexScan3D

Post by Micr0 »

Micr0 wrote: 19 Jan 2021, 23:22
contactpolyga wrote: 19 Jan 2021, 23:15 Hi all,

The beta implementation of the IS driver is done. If you've received a demo of the software, you'll need a new version. Please email our support email to get a beta FS3D build to test it with your Imaging Source / HP system. It's our initial pass so we do expect some rough edges and bugs, but just let us know and we'll try to fix it for you.
Thank you. Emailing now.
I got the chance to play around with Flex last night. I did what is best described as a HalfAssed calibration (I wasn't very careful, and didn't complete the capture of all the positions). The system did calibrate and returned a result of 89%. Even with that figure I was surprised at the quality of the scans I was getting right off the bat. Most of the time I spent last night was learning my way around the software interface. I'm still learning the quirks but was able to get a decent final fused mesh. I have bunch of questions but I'll wait till after I can play with the software some more before I post them. The most important one right now however is: Is there any way to change the color of the final mesh? Both the highlight (selected) color and or the nominal (Grey)? I really don't like the Red.
µ
contactpolyga
Posts: 73
Joined: 26 Nov 2020, 23:26

Re: David / IS Cameras + FlexScan3D

Post by contactpolyga »

It’s all somewhere in advanced settings... maybe.. :oops: it’s changeable for sure just don’t remember where. :|
Post Reply