David / IS Cameras + FlexScan3D

Post Reply
contactpolyga
Posts: 18
Joined: 26 Nov 2020, 23:26

David / IS Cameras + FlexScan3D

Post by contactpolyga »

Hi all,

Thanks to the users who sent us their Imaging Source cameras over Christmas, we did a quick scan the David IS cameras via DirectShow drivers, probably will take some time to polish off the drivers and to release a new version at the end of the month for anyone with IS cameras to try.

--
ISCameraTest1.jpg
ISCameraTest3.png
pottersfriend
Posts: 10
Joined: 19 Jan 2017, 17:36

Re: David / IS Cameras + FlexScan3D

Post by pottersfriend »

Very cool.

Thanks for the progress update.
Alonso
Posts: 42
Joined: 05 Dec 2016, 05:55

Re: David / IS Cameras + FlexScan3D

Post by Alonso »

Nice! This is great news!
User avatar
Micr0
Posts: 475
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: David / IS Cameras + FlexScan3D

Post by Micr0 »

contactpolyga wrote: 12 Jan 2021, 21:57 Hi all,

Thanks to the users who sent us their Imaging Source cameras over Christmas, we did a quick scan the David IS cameras via DirectShow drivers, probably will take some time to polish off the drivers and to release a new version at the end of the month for anyone with IS cameras to try.

--

ISCameraTest1.jpg

ISCameraTest3.png
Thanks. Looking forward to trying Flex with my full David rig. The point grey camera I have is very old and I haven't been able to get it to work with my scanning computer.
µ
mading
Posts: 178
Joined: 31 Jan 2017, 13:09

Re: David / IS Cameras + FlexScan3D

Post by mading »

Thanks. It's really a good news for us.
It will help the community of DIYrs growing.
HP 3D scan, Acer K132, LG PF50, 2x DMK23UX236, 2xComputar M1214, David Calibration panels, Melamine panels, DIY rotary table. RangeVision DIY: 2x DahengMer630, 2X12 and 2X16 mm 5Mp ZK lenses, RV turntable
contactpolyga
Posts: 18
Joined: 26 Nov 2020, 23:26

Re: David / IS Cameras + FlexScan3D

Post by contactpolyga »

Hi all,

The beta implementation of the IS driver is done. If you've received a demo of the software, you'll need a new version. Please email our support email to get a beta FS3D build to test it with your Imaging Source / HP system. It's our initial pass so we do expect some rough edges and bugs, but just let us know and we'll try to fix it for you.
User avatar
Micr0
Posts: 475
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: David / IS Cameras + FlexScan3D

Post by Micr0 »

contactpolyga wrote: 19 Jan 2021, 23:15 Hi all,

The beta implementation of the IS driver is done. If you've received a demo of the software, you'll need a new version. Please email our support email to get a beta FS3D build to test it with your Imaging Source / HP system. It's our initial pass so we do expect some rough edges and bugs, but just let us know and we'll try to fix it for you.
Thank you. Emailing now.
µ
User avatar
Micr0
Posts: 475
Joined: 15 Nov 2016, 15:20
Location: New York City

Re: David / IS Cameras + FlexScan3D

Post by Micr0 »

Micr0 wrote: 19 Jan 2021, 23:22
contactpolyga wrote: 19 Jan 2021, 23:15 Hi all,

The beta implementation of the IS driver is done. If you've received a demo of the software, you'll need a new version. Please email our support email to get a beta FS3D build to test it with your Imaging Source / HP system. It's our initial pass so we do expect some rough edges and bugs, but just let us know and we'll try to fix it for you.
Thank you. Emailing now.
I got the chance to play around with Flex last night. I did what is best described as a HalfAssed calibration (I wasn't very careful, and didn't complete the capture of all the positions). The system did calibrate and returned a result of 89%. Even with that figure I was surprised at the quality of the scans I was getting right off the bat. Most of the time I spent last night was learning my way around the software interface. I'm still learning the quirks but was able to get a decent final fused mesh. I have bunch of questions but I'll wait till after I can play with the software some more before I post them. The most important one right now however is: Is there any way to change the color of the final mesh? Both the highlight (selected) color and or the nominal (Grey)? I really don't like the Red.
µ
contactpolyga
Posts: 18
Joined: 26 Nov 2020, 23:26

Re: David / IS Cameras + FlexScan3D

Post by contactpolyga »

It’s all somewhere in advanced settings... maybe.. :oops: it’s changeable for sure just don’t remember where. :|
Post Reply