Hardware Synchronization and Triggering (HS)
Increasing scan speed; You can reach 0.7~1 seconds per scan.
Increasing scan stability; All scans comes out clean and free of any strips.
Increasing images quality; Less noise on images and scans.
Reduce load on cameras; Control the temperature and increase the life time of the cameras.
Synchronous projector controlling; Compatible with any ordinary HDMI projector.
Compatible with all cameras with I/O port. Dshow, Daheng, FLIR, PT and ....
This option controls the timing of the scanner in a closed loop.
so all things happen exactly at the correct time and there is no need for any extra delays.
But all things aren't limited only to this timing control; I implemented some
advanced algorithm in my software and HS option which results in
higher scanning speed and
stability even with conventional cameras and projectors.
Now Dshow cameras are faster and more stable than FLIR and other SDK cameras, both in capturing and also in sorting data.
HS also increases scan
stability and scan
quality.
According to the reports and documents of the camera manufacturers, the output images of the camera when the camera is working in the "Triggering" mode is less noisy than in the "Free Running" mode.
HS control your cameras with
variable frame rate. When it needs high capturing speed, it increases the frame rate, and when it needs only a demo view of cameras, it can reduce frame rate. This helps reduce load on the cameras and controlling their temperature and increasing cameras lifetime.
HS controls the projector in a
closed loop, so all patterns projection are tracked accurately.
My last version of HS is compatible with any projector and any cameras that have I/O port.
Watch the following video to see Hardware Triggering functionality:
https://www.youtube.com/watch?v=eKEqqhiK2es
https://www.youtube.com/watch?v=eKEqqhiK2es