A few scans

What have you scanned recently?
Post Reply
erol
Posts: 18
Joined: 07 Oct 2017, 17:08

A few scans

Post by erol » 03 Feb 2019, 14:04

120mm panel
0,16-0,17 rms
accuracy: 0,03mm
turn table and david sls3 dual camera
hp 3d scan 5.5.1
Attachments
2019-02-03_16-45-06.png
2019-02-03_16-43-19.png
2019-01-26_22-11-20.png
2019-01-26_22-09-06.png
2019-01-22_21-44-44.png
2019-01-22_21-44-21.png
2019-01-16_22-31-54.png
2019-01-16_22-31-05.png

Alonso
Posts: 24
Joined: 05 Dec 2016, 05:55

Re: A few scans

Post by Alonso » 04 Feb 2019, 02:39

Very Nice!! :o

Were those done with the use of the HP turntable?

User avatar
Micr0
Posts: 306
Joined: 15 Nov 2016, 15:20

Re: A few scans

Post by Micr0 » 04 Feb 2019, 16:17

Excellent!

Can you show us your set up?
µ

erol
Posts: 18
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol » 06 Feb 2019, 21:10

Alonso wrote:
04 Feb 2019, 02:39
Very Nice!! :o

Were those done with the use of the HP turntable?
Yes Alonso I use Hp turn table when scanning small pieces.

Micr0 wrote:
04 Feb 2019, 16:17
Excellent!

Can you show us your set up?
This is my scanner
Attachments
P_20190206_222601_vHDR_Auto.jpg
P_20190206_201801_vHDR_Auto.jpg

erol
Posts: 18
Joined: 07 Oct 2017, 17:08

Re: A few scans

Post by erol » 06 Feb 2019, 21:26

Part size 33mm
I used a 60mm calibration panel.
Rms: 0.192 - 0.194
Accuracy: 0.01 mm

And very important, i used play dough to help align. :D
Attachments
2019-02-07_00-24-30.png
2019-02-07_00-23-29.png
P_20190206_231222_vHDR_Auto.jpg
P_20190206_231058_vHDR_Auto.jpg
P_20190206_230328_vHDR_Auto.jpg
P_20190206_222601_vHDR_Auto.jpg

User avatar
Micr0
Posts: 306
Joined: 15 Nov 2016, 15:20

Re: A few scans

Post by Micr0 » 08 Feb 2019, 02:17

Sweet. Thanks. look forward to seeing more scans. :)
µ

Post Reply