Helmet and shoe

What have you scanned recently?
Post Reply
DenKor
Posts: 11
Joined: 07 Jan 2019, 16:34
Location: Russia

Helmet and shoe

Post by DenKor » 29 May 2019, 16:31

Hello! I'm new in 3d scanning and these are some of my scans:
My hardware is: LG PF 1500G, RisingCam E3ISPM03100KPA (chinese camera from AliExpress with sony imx 256 sensor), 12mm ZLKC CCTV lens 2/3" HM1214MP5 (from AliExpress).
2019-05-29_08-59-31.png
2019-05-29_08-59-14.png
2019-05-29_09-06-57.png
2019-05-29_09-06-45.png
photo_2019-05-29_09-07-22.jpg
photo_2019-05-29_09-07-13.jpg
P.S. it's 21 scan with 24 pattern and i used fusions settings 1500 : 2
5 minutes in manual scan mode and 1.5 hours of processing. Unfortunately I have a very slow computer with AMD A6-7310 processor :(
Last edited by DenKor on 29 May 2019, 16:41, edited 3 times in total.

DenKor
Posts: 11
Joined: 07 Jan 2019, 16:34
Location: Russia

Re: Helmet and shoe

Post by DenKor » 29 May 2019, 16:34

One more scan:
2019-05-20_19-19-53.png
2019-05-20_19-20-05.png
2019-05-20_19-20-11.png
2019-05-20_19-20-23.png
photo_2019-05-20_19-18-45 (2).jpg
photo_2019-05-20_19-18-45 (3).jpg
photo_2019-05-20_19-18-45.jpg
Снимок6.JPG

User avatar
Micr0
Posts: 328
Joined: 15 Nov 2016, 15:20

Re: Helmet and shoe

Post by Micr0 » 29 May 2019, 21:13

DenKor wrote:
29 May 2019, 16:34
One more scan:
2019-05-20_19-19-53.png
2019-05-20_19-20-05.png
2019-05-20_19-20-11.png
2019-05-20_19-20-23.png
photo_2019-05-20_19-18-45 (2).jpg
photo_2019-05-20_19-18-45 (3).jpg
photo_2019-05-20_19-18-45.jpg
Снимок6.JPG
Excellent! thanks for sharing.
Did the shiny surface of the helmet cause problems? did you use spray?
µ

DenKor
Posts: 11
Joined: 07 Jan 2019, 16:34
Location: Russia

Re: Helmet and shoe

Post by DenKor » 30 May 2019, 19:10

Micr0 wrote:
29 May 2019, 21:13
DenKor wrote:
29 May 2019, 16:34
One more scan:
2019-05-20_19-19-53.png
2019-05-20_19-20-05.png
2019-05-20_19-20-11.png
2019-05-20_19-20-23.png
photo_2019-05-20_19-18-45 (2).jpg
photo_2019-05-20_19-18-45 (3).jpg
photo_2019-05-20_19-18-45.jpg
Снимок6.JPG
Excellent! thanks for sharing.
Did the shiny surface of the helmet cause problems? did you use spray?
I did not use spray or surface matting. So I had some problem areas when scanning (especially in the corners due to reflection):
2019-05-29_09-09-32.png

mading
Posts: 97
Joined: 31 Jan 2017, 13:09

Re: Helmet and shoe

Post by mading » 31 May 2019, 16:12

Very interesting... nice job!
Seems that LG it's worth a try :-)

mr_cg
Posts: 7
Joined: 10 Jul 2018, 20:17

Re: Helmet and shoe

Post by mr_cg » 23 Jun 2019, 19:11

Very nice!!!

Is the camera you are using monochrome or color camera?
The results are really excellent.

DenKor
Posts: 11
Joined: 07 Jan 2019, 16:34
Location: Russia

Re: Helmet and shoe

Post by DenKor » 24 Jun 2019, 07:02

mr_cg wrote:
23 Jun 2019, 19:11
Very nice!!!

Is the camera you are using monochrome or color camera?
The results are really excellent.
It is a colour camera with IMX265 1/1.8" SONY Exmor CMOS sensor.
I am making a new mount for camera and projector , so I hope that over time there will be more scans.
Attachments
IMG_20190519_211609.jpg
IMG_20190519_211432.jpg
IMG_20190519_211524.jpg
IMG_20190519_211516.jpg
IMG_20190519_211245.jpg
IMG_20190518_184741.jpg
IMG_20190518_184750.jpg

Post Reply