Some of my scans

What have you scanned recently?
Post Reply
User avatar
OBNRacerMan
Posts: 9
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Some of my scans

Post by OBNRacerMan » 14 Aug 2019, 11:21

I became interested in 3D scanning a little more than six months ago. I have scanners of "different systems" - the first was Kinect for xBox360, then Ciclop laser appeared (which turned out to be nothing more than a toy).
head_01.jpg
One of the first “self-portraits” made with Kinect :-)
I don’t bring scans from Ciclops, there is nothing to look at especially.

And then I, already realizing what each type of scanner can do, assembled a “normal” SLS scanner for myself, gradually improving it (improvement using cameras with better characteristics, adding a second camera, a turntable with a motorized drive for automatic circular scanning of small objects)
10rub-3b.jpg
The minimum size of the object that was (relatively good) scanned (Russian coin, Diameter 22mm ).
mouse_F_01.jpg
Full scan of an old computer wireless mouse - 1
mouse_F_02.jpg
Full scan of an old computer wireless mouse - 2
soldier_60mm_03.jpg
Full scan toy soldier
abhasia_shell_04.jpg
Starfish scan made yesterday (60mm diameter)
velo_01.jpg
The part of the bike made up of more than 10 close-range scans (I forgot that the scanner was calibrated to a 30mm table :-) )

User avatar
Micr0
Posts: 338
Joined: 15 Nov 2016, 15:20

Re: Some of my scans

Post by Micr0 » 14 Aug 2019, 14:24

Nice work. Do you coat any of the objects you are scanning?
µ

User avatar
OBNRacerMan
Posts: 9
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Some of my scans

Post by OBNRacerMan » 14 Aug 2019, 14:35

Micr0 wrote:
14 Aug 2019, 14:24
Do you coat any of the objects you are scanning?
No, the scan was done "as is". I don’t have anything suitable for matting yet (and using ordinary chalk or other powdered products will require thorough cleaning after scanning - which I don’t want to do :-))
Here, for example, the coin looked like when scanning:
10rub_Mtest_05.jpg
Screenshot from program

User avatar
OBNRacerMan
Posts: 9
Joined: 12 Aug 2019, 09:46
Location: Obninsk, Russia

Re: Some of my scans

Post by OBNRacerMan » 15 Aug 2019, 19:58

Trying to scan something big enough. I made 12 scans from one point (only rotated scanner horizontally and vertically on a tripod). I used my largest 110mm calibration chart.
velo_bike_03.jpg
View from the scan point
velo_bike_02.jpg
And a little from a different angle ...

Post Reply