MindVision SUA630M (USB3.0 IMX178)

[hoffybeefe]

Hi OBNRacerMan,

Thanks for the info. I will consider the pro's and con's just a little longer and then just take a dive. I will report back with a new post depending one which way i go so i can add to the information should it be a different camera.

[OBNRacerMan]

Just yesterday, I took my second "cool" camera from the post office (due to the "wrecking" actions of our customs, the saga with its purchase lasted for several months).
The second camera is also based on the very advanced SONY IMX178 matrix (I bought a monochrome version specifically for use in the scanner)
I already managed to try it - and found out that both of these cameras (despite the specific features of David / HP's interaction with DirectShow) work in HP3Dscan - for this you need to change the camera name through the driver (if the names are the same, only one camera will be seen).

Both cameras are up and running

P.S. At the same time, cameras with UVC support that work without special drivers can have the same name and not have problems with this.

Further development involves the transition to a more advanced (and, most importantly, actively developing) ScanCenter software from RangeVision. I already bought a kit from the program (license key), calibration panels of three different sizes, and, in addition, an automatic turntable controlled by the program (it has not yet been delivered to me).

Set of calibration panels and license key.

However, there are problems with the support of my cameras program (I really hope that the manufacturer will be able to introduce support for such cameras).

[hoffybeefe]

Good Evening,

Thanks for the info! I've managed to jump in with Basler so i've ordered that camera and have been waiting about 2 months and by the looks of it i'll be waiting another month at best (thanks virus). I shall repot my success or fail eventually.. hopefully.

Thanks for the other scan software name.. i shall investigate it for its viability as a future option. If its as good or better then HP3DScan (RIP DAVID) then i'll be excited (assuming its cost is not prohibitive like FlexScan3D).

[mading]

In EU rangevision is not selling the software.
At least it's what they told me.

We are waiting for your updates!

[OBNRacerMan]

In EU rangevision is not selling the software.
At least it's what they told me.

We are waiting for your updates!

Yes, the program is available only to a limited number of Russian fans who have created their 3D scanners and are actively involved in the development of the community.

At the moment, owning this program is "nominal" for me - my cameras do not yet have support in it (officially there is only support for IDS cameras and some ToupCam). But I communicate with representatives ... according to them, if the introduction of support for cameras like mine does not require big changes, then they will implement it (in the beta version support for Daheng cameras appeared)

[Micr0]

In EU rangevision is not selling the software.
At least it's what they told me.

We are waiting for your updates!

Yes, the program is available only to a limited number of Russian fans who have created their 3D scanners and are actively involved in the development of the community.

At the moment, owning this program is "nominal" for me - my cameras do not yet have support in it (officially there is only support for IDS cameras and some ToupCam). But I communicate with representatives ... according to them, if the introduction of support for cameras like mine does not require big changes, then they will implement it (in the beta version support for Daheng cameras appeared)

Fascinating. Thanks for sharing this.

Looking forward to seeing the results of your new cameras.

[OBNRacerMan]

Looking forward to seeing the results of your new cameras.

I posted the scan results here